VISI Multi-Slides ImageVISI Multi-Slides ImageVISI Multi-Slides Image

PDFVISI Multi-Slides

VISI Multi-Slides - Software for the design of CAMS used in "multi slide machines"

VISI Multi-slides is an extension of VISI Progress. It has been developed for the design of CAMS used in “multi slide machines”, specifically for the bending process. Quickly and efficiently it allows the simulation and synchronisation of the bending cycle performed in succession to the cutting action of the progressive tool. Construction of the CAM form and all relevant dimensions is automatic for each specified type of machine.

Features at a glance:

  • Multi-slide machine database
  • Slides library, customisable transmission ratio
  • Kinematic simulation
  • Interference checking against the fingers / flanges
  • Sharing of the un-used angular section to optimize the finger movement
  • Cycle diagram
  • Automatic cam construction

Progressive die tooling is a popular process for producing sheet metal parts although it is not the only technology in this field. The fundamental concept of “one tool produces all” is not always an advantage and in some cases a “transfer” process provides a better solution (automotive, body, chassis, etc). However, a combination of these two technologies can provide an extra advantage, especially when the part production needs the application of specific technologies (welding, assembling, etc). Multi-Slides is an example of this combination: the progressive die tool remains in control of the cutting and drawing actions, whilst the bending cycle is performed by this special multi-slide tooling.

Synchronised and Optimised. Starting from the unfolding steps, every finger can be designed by using a series of quick 2D sketches. These sketches are used to obtain the number of movements, stroke value and the orientation of each finger. This information is then used as input data to compile a “computation table”.

On completion of the computation table, a kinematic simulation of the entire cycle can be performed. This enables the designer to check the available synchronisation level, possible interferences among moving parts, and the optimisation level by checking the value of the unused angular sector.

Cycle diagram and Cam construction. It is possible to obtain the operation diagram at any point during the design cycle, especially useful for printing or analysis. Geometrical construction of each required cam is an automatic process and the resulting forms can be output as a 2D profile or a 3D solid, each with their own relevant annotation.